Shopping on line can be easy, simple and save you lots of money. It can also take a lot of your time, frustrate you, and result in unwanted purchases. Now the same can be said for regular high street shopping, but with the vast opportunity presented by the Internet it will pay you to spend a few minutes reading this and understanding how to better optimize your Fuel Injection shopping experience:

1. Compare - without doubt the biggest advantage that the Fuel Injection offers shoppers today is the ability to compare thousands of Fuel Injection at a time. This is a great thing, but not necessarily all the time! Too much can be daunting at times so take advantage of the great comparison sites and where possible let them do the hard work for you.

2. Research - if it has been said it will be on the internet. Ignorance is no longer a justifiable reason for buying the wrong thing. Take the time to research in detail everything that you could possible want to know about

3. Testimonials - don't know anybody that has bought a Fuel Injection? Wrong! If the Fuel Injection is good the internet will let you know. Use the Internet as a friend and get testimonials before you buy.

4. Questions - Got a question about Fuel Injection then search the Forums, FAQ's, Blogs etc. Don't be afraid to ask .....

5. Reputation - Never heard of the company selling Fuel Injection? Don't worry, no reason why you should know every company in the world, but you know someone that does! Use the internet to find out what people are saying about Fuel Injection and build up a picture of their reputation for sales, returns, customer service, delivery etc.

6. Returns - still worried that even after all of the above your Fuel Injection wont be what you want? Check out the returns policy. There is so much competition now that someone, somewhere is bound to offer the terms that you are comfortable with.

7. Feedback - happy with your Fuel Injection then let people know, after all you are depending on others people input in your buying decision, so why not give a little back.

8. Security - check for the yellow padlock on the Fuel Injection site before you buy, and the s after http:/ /i.e. https:// = a secure site

9. Contact - got a question about Fuel Injection, or want to leave a comment then check out the sites contact page. Reputable companies have them and respond.

10. Payment - ready to pay for your Fuel Injection, then use your credit card or PayPal! Be aware of companies that don't accept them, there may be genuine reasons but given the huge amount of choice you have when buying online there is no reason at all not to buy via credit card or PayPal.

Fuel injection is a means of metering fuel into an internal combustion engine. In modern automotive applications, fuel metering is one of several functions performed by an "engine management system".

A fuel injection system is designed and calibrated specifically for the type(s) of fuel it will handle: gasoline (petrol), Autogas (Liquefied petroleum gas, also known as propane), ethanol, methanol, methane (natural gas), hydrogen or diesel. The majority of fuel injection systems are for gasoline or diesel applications. With the advent of electronic fuel injection, the diesel and gasoline hardware has become quite similar. EFI's programmable firmware has permitted common hardware to be used with multiple different fuels.For gasoline engines, carburetors were the predominant method to meter fuel before the widespread use of fuel injection. However, a wide variety of injection systems have existed since the earliest usage of the internal combustion engine.

The primary functional difference between carburetors and fuel injection is that fuel injection atomizes the fuel by forcibly pumping it through a small nozzle under high pressure, while a carburetor relies on the vacuum created by intake air rushing through it to add the fuel to the airstream.

The fuel injector is only a nozzle and a valve: the power to inject the fuel comes from farther back in the fuel supply, from a pump or a pressure container.

Objectives The functional objectives for fuel injection systems can vary. All share the central task of supplying fuel to the combustion process, but it is a design decision how a particular system will be optimized. There are several competing objectives such as: *power output *fuel efficiency *emissions performance *ability to accommodate alternative fuels *durability *reliability *driveability and smooth operation *initial cost *maintenance cost *diagnostic capability *range of environmental operation

Certain combinations of these goals are conflicting, and it is impractical for a single engine control system to fully optimize all criteria simultaneously. In practice, automotive engineers strive to best satisfy a customer's needs competitively. The modern digital electronic fuel injection system is far more capable at optimizing these competing objectives than a carburetor.

Benefits Engine operation Operational benefits to the driver of a fuel-injected car include smoother and more dependable engine response during quick throttle transitions, easier and more dependable engine starting, better operation at extremely high or low ambient temperatures, reduced maintenance intervals, and increased fuel efficiency.

An engine's air/fuel ratio must be accuracy and precision controlled under all operating conditions to achieve the desired engine performance, emissions, driveability, and fuel economy. Modern electronic fuel injection systems meter fuel very accurately and precisely, and PID controller fuel control based on feedback from an oxygen sensor (or "O2 sensor") lets fuel-injected engines run considerably cleaner than comparable carbureted engines. Properly-designed fuel injection systems can react faster and more precisely to rapidly changing inputs such as rapid throttle movements, and can tailor fuel distribution to closely match the engine's needs across a wider range of operating conditions such as load, ambient temperature, operating temperature, fuel quality, and altitude (i.e., barometric pressure).

Emissions, efficiency, and power Fuel injection generally delivers a more accurate and equal mass of fuel to each cylinder of the engine than can a carburetor, thus improving the cylinder-to-cylinder distribution. Exhaust Automobile emissions control are cleaner, not only because the more precise and accurate fuel metering reduces the concentration of toxic chemicals leaving the engine, but also because exhaust cleanup devices such as the catalytic converter can be optimized to operate much more efficiently given exhaust of precise and predictable composition.

Fuel injection generally increases engine efficiency. With the improved cylinder-to-cylinder fuel distribution provided by fuel injection, less fuel is needed for the same power output. When cylinder-to-cylinder distribution is less than ideal, as is always the case to some degree, some cylinders receive excess fuel as a side effect of ensuring that all cylinders receive sufficient fuel. Power output is asymmetrical with respect to air/fuel ratio; burning extra fuel in the rich cylinders does not reduce power nearly as quickly as burning too little fuel in the lean cylinders. However, rich-running cylinders are undesirable from the standpoint of exhaust emissions, fuel efficiency, engine wear, and engine oil contamination. Deviations from perfect air/fuel distribution, however subtle, affect the emissions, by not letting the combustion events be at the chemically ideal (stoichiometric) air/fuel ratio. Grosser distribution problems eventually begin to reduce efficiency, and the grossest distribution issues finally affect power. Increasingly poorer air/fuel distribution affects emissions, efficiency, and power, in that order. By optimizing the homogeneity of cylinder-to-cylinder mixture distribution, all the cylinders approach their maximum power potential and the engine's overall power output improves.

A fuel-injected engine often produces more power than an equivalent carbureted engine. Fuel injection alone does not necessarily increase an engine's maximum potential output, for increased airflow is needed to burn more fuel to generate more heat to generate more output. The combustion process converts the fuel's chemical energy into heat energy, whether the fuel is supplied by fuel injectors or a carburetor. However, airflow is often improved with fuel injection, the components of which allow more design freedom to improve the air's path into the engine. In contrast, a carburetor's mounting options are limited because it is larger, it must be carefully oriented with respect to gravity, and it must be equidistant from each of the engine's cylinders to the maximum practicable degree. These design constraints generally compromise airflow into the engine. Furthermore, a carburetor relies on a drag-inducing Venturi effect to create a local air pressure difference, which forces the fuel into the air stream. The flow loss caused by the venturi, however, is small compared to other flow losses in the induction system. In a well-designed carburetor induction system, the venturi is not a significant airflow restriction.Aside from airflow considerations, fuel injection offers a more homogeneous air/fuel mixture due to better atomization of the fuel entering the cylinders.

History and development Frederick William Lanchester joined the Forward Gas Engine Company Birmingham, England in 1889. He carried out what were possibly the earliest experiments with fuel injection.

Fuel injection has been used commercially in diesel engines since the mid 1920s. The concept was adapted for use in petrol-powered aircraft during World War II, and direct injection was employed in some notable designs like the Daimler-Benz DB 603 and later versions of the Wright R-3350 used in the B-29 Superfortress.

One of the first commercial gasoline injection systems was a mechanical system developed by Robert Bosch GmbH and introduced in 1955 on the Mercedes-Benz 300SL. This system used a normal fuel pump, to provide fuel to a mechanically driven injection pump, which had separate plungers per injector to deliver a very high injection pressure. A variant of this system, also by Bosch, was later used by Porsche from 1969 until 1973 on the 911 production range. Porsche continued using it on its racing cars into the late seventies and early eighties, and cars like the Porsche 906, 908, 910, the famous 917 (in its regular normally aspirated or 5.5 Liter/1500 HP Turbocharged form), and 935 all used Bosch or Kugelfischer built variants of injection. It was also used by the BMW 2000 Ti. Due to the high pressure, the fuel atomisation was exceptional, resulting in good power, throttle response and the pump design offered second-to-none reliability. It did have drawbacks as the fuel economy and emission results were terribly inefficient compared to more modern injection setups such as electronic injection, or even the Jetronic systems that went in production in the early seventies.

In 1957, Chevrolet introduced a mechanical fuel injection option, made by General Motors Corporation' Rochester, New York Products division, for its GM Small-Block engine#283. This system directed the inducted engine air across a "spoon shaped" plunger, which moved in proportion to the air volume. The plunger connected to the fuel metering system which mechanically dispensed fuel to the cylinders via distribution tubes. This engine was rated at 283 hp (211 kW) from 283 in³ (4.6 L), though it really produced about 290 hp. This made it one of the first production engines in history to exceed 1 hp/in³ (45.5 kW/L), after Chrysler Chrysler Hemi engine engine and a number of others.

During the 1960s, other mechanical injection systems such as Hilborn were occasionally used on modified American V8 engines in various racing applications such as drag racing, oval racing, and road racing. These racing-derived systems were not suitable for everyday street use.

One of the first electronic fuel injection system was Electrojector, developed by the Bendix Corporation. In 1957, American Motors was to offer a special edition Rambler Rebel with a 288 horsepower AMC V8 engine#327 engine optionally equipped with Electrojector. This was to have been the first production EFI engine, but Electrojector's teething problems meant only a few cars were so equipped, and all are thought to have been retrofitted with 4-barrel carburetors before they were first sold. Chrysler offered Electrojector on the 1958 DeSoto Adventurer, arguably the first series-production car equipped with a throttle body EFI system, but the early electronic components weren't equal to the rigors of underhood service, and were too slow to keep up with the demands of "on the fly" engine control. Most vehicles originally so equipped were field-retrofitted with 4-barrel carburetors. The Electrojector patents were subsequently sold to Bosch.

Bosch developed an electronic fuel injection system, called Jetronic#D Jetronic (D for Druck, the German word for pressure), which was first used on the Volkswagen Type 3 in 1967. This was a speed/density system, using engine speed and intake manifold air density to calculate "air mass" flow rate and thus fuel requirements. The system used all analog, discrete electronics, and an electro-mechanical pressure sensor. The sensor was susceptible to vibration and dirt. This system was adopted by Volkswagen, Mercedes-Benz, Porsche, Citroën, Saab automobile and Volvo. Lucas licensed the system for production with Jaguar (car).

Bosch superseded the D-Jetronic system with the Jetronic#K Jetronic and Jetronic#L Jetronic systems for 1974, though some cars (such as the Volvo 164) continued using D-Jetronic for the following several years, and General Motors installed a very close copy of D-Jetronic on Cadillacs starting in 1977. L-Jetronic first appeared on the 1974 Porsche 914, and uses a mechanical airflow meter (L for Luft, German for air) which produces a signal that is proportional to "air volume". This approach required additional sensors to measure the barometer and temperature, to ultimately calculate "air mass". L-Jetronic was widely adopted on European cars of that period, and a few Japanese models a short time later.

In 1982, Robert Bosch GmbH introduced a sensor that directly measures the air mass flow into the engine, on their L-Jetronic system. Bosch called this Jetronic#LH Jetronic (L for Luftmasse, or air, and H for Hitzdraht, or hot-wire). The mass air sensor utilizes a heated platinum wire placed in the incoming air flow. The rate of the wire's cooling is proportional to the air mass flowing across the wire. Since the hot wire sensor directly measures air mass, the need for additional temperature and pressure sensors is eliminated. The LH-Jetronic system was also the first fully digital EFI system, which is now the standard approach. The advent of the digital microprocessor permitted the integration of all powertrain sub-systems into a single control module.

Supersession of carburetors Throughout the 1950s and 1960s, various federal, state and local governments conducted studies into the numerous sources of air pollution. These studies ultimately attributed a significant portion of air pollution to the automobile, and concluded air pollution is not bounded by local political boundaries. At that time, such minimal emission control regulations as existed were promulgated at the municipal or, occasionally, the state level. The ineffective local regulations were gradually supplanted by more comprehensive state and federal regulations. By 1967 the state of California (Governor Reagan), created the California Air Resources Board, and in 1970, the United States Environmental Protection Agency was formed. Both agencies now create and enforce emission regulations for automobiles, as well as for many other sources. Similar agencies and regulations were contemporaneously developed and implemented in Europe, Australia, and Japan.

The ultimate combustion goal is to match each molecule of fuel with a corresponding number of molecules of oxygen so that neither has any molecules remaining after combustion in the engine and catalytic converter. Such a balanced condition is known as stoichiometry. Extensive carburetor modifications and complexities were needed to approach stoichiometric engine operation in order to comply with increasingly-strict US automobile emissions control regulations of the 1970s and 1980s. This increase in complexity gradually eroded and then reversed the simplicity, cost, and packaging advantages carburetors had traditionally offered.

Fuel injection appeared first as novelty equipment on American-made cars in the late 1950s, such as the 1958 Chrysler products equipped with Bendix Corporation' ElectroJector, and 1957–1965 Rochester Products Division fuel injected Chevrolet Corvettes. About a decade later, more practical fuel injection systems were introduced in European-made cars. As Automobile emissions control progressively tightened worldwide, generally led by the US state of California's especially stringent rules, automakers had to improve the precision and accuracy with which fuel was metered to the engine. Catalytic converters also became practically universal equipment.

There are three primary types of toxic emissions from an internal combustion engine: Carbon Monoxide (CO), Unburned hydrocarbon (HC), and NOx (NOx). CO and HC result from incomplete combustion of fuel due to insufficient oxygen in the combustion chamber. NOx, in contrast, results from excessive oxygen in the combustion chamber. The opposite causes of these pollutants makes it difficult to control all three simultaneously. Once the permissible emission levels dropped below a certain point, catalytic treatment of these three main pollutants became necessary. This required a particularly large increase in fuel metering accuracy and precision, for simultaneous catalysis of all three pollutants requires that the fuel/air ratio be held within a very narrow range of stoichiometry. The open loop fuel injection systems had already improved cylinder-to-cylinder fuel distribution and engine operation over a wide temperature range, but did not offer sufficient fuel/air ratio control to enable effective exhaust catalysis. Closed loop fuel injection systems improved the air/fuel ratio control with an exhaust gas oxygen sensor. The O2 sensor is mounted in the exhaust system upstream of the catalytic converter, and enables the ECU to determine and adjust the air/fuel ratio precisely and quickly.

Fuel injection was phased in through the latter '70s and '80s at an accelerating rate, with the US and German markets leading and the UK and Commonwealth markets lagging somewhat, and since the early 1990s, almost all gasoline passenger cars sold in first world markets like the United States, Europe, Japan, and Australia have come equipped with electronic fuel injection (EFI). Many motorcycles still utilize carbureted engines, though all current high-performance designs have switched to EFI.

Fuel injection systems have evolved significantly since the mid 1980s. Current systems provide an accurate, reliable and cost-effective method of metering fuel and providing maximum engine efficiency with clean exhaust emissions, which is why EFI systems have replaced carburetors in the marketplace. EFI is becoming more reliable and less expensive through widespread usage. At the same time, carburetors are becoming less available, and more expensive. Even marine applications are adopting EFI as reliability improves. Virtually all internal combustion engines, including motorcycles, off-road vehicles, and outdoor power equipment, may eventually use some form of fuel injection.

It should be noted that carburetion remains a less costly alternative where strict emission regulations and advanced vehicle diagnostic and repair infrastructure do not exist, as in developing countries. Fuel injection is gradually replacing carburetors in these nations too as they adopt emission regulations conceptually similar to those in force in Europe, Japan, Australia and North America.

Basic function The process of determining the amount of fuel, and its delivery into the engine, are known as fuel metering. Early injection systems used mechanical methods to meter fuel (non electronic, or mechanical fuel injection). Modern systems are nearly all electronic, and use an electronic solenoid (the injector) to inject the fuel. An electronic engine control unit calculates the mass of fuel to inject.

Modern fuel injection schemes follow much the same setup. There is a mass airflow sensor or manifold absolute pressure sensor at the intake, typically mounted either in the air tube feeding from the air filter box to the throttle body, or mounted directly to the throttle body itself. The mass airflow sensor does exactly what its name implies; it senses the mass of the air that flows past it, giving the computer an accurate idea of how much air is entering the engine. The next component in line is the Throttle Body. The throttle body has a throttle position sensor mounted onto it, typically on the butterfly valve of the throttle body. The throttle position sensor (TPS) reports to the computer the position of the throttle butterfly valve, which the ECM uses to calculate the load upon the engine. The fuel system consists of a fuel pump (typically mounted in-tank), a fuel pressure regulator, fuel lines (composed of either high strength plastic, metal, or reinforced rubber), a fuel rail that the injectors connect to, and the fuel injector(s). There is a coolant temperature sensor that reports the engine temperature to the ECM, which the engine uses to calculate the proper fuel ratio required. In sequential fuel injection systems there is a camshaft position sensor, which the ECM uses to determine which fuel injector to fire. The last component is the oxygen sensor. After the vehicle has warmed up, it uses the signal from the oxygen sensor to perform fine tuning of the fuel trim.

The fuel injector acts as the fuel-dispensing nozzle. It injects liquid fuel directly into the engine's air stream. In almost all cases this requires an external pump. The pump and injector are only two of several components in a complete fuel injection system.

In contrast to an EFI system, a carburetor directs the induction air through a venturi pump, which generates a minute difference in air pressure. The minute air pressure differences both emulsify (premix fuel with air) the fuel, and then acts as the force to push the mixture from the carburetor nozzle into the induction air stream. As more air enters the engine, a greater pressure difference is generated, and more fuel is metered into the engine. A carburetor is a self-contained fuel metering system, and is cost competitive when compared to a complete EFI system.

An EFI system requires several peripheral components in addition to the injector(s), in order to duplicate all the functions of a carburetor. A point worth noting during times of fuel metering repair is that early EFI systems are prone to diagnostic ambiguity. A single carburetor replacement can accomplish what might require numerous repair attempts to identify which one of the several EFI system components is malfunctioning. Newer EFI systems since the advent of On-Board Diagnostics diagnostic systems, can be very easy to diagnose due to the increased ability to monitor the realtime data streams from the individual sensors. This gives the diagnosing technician realtime feedback as to the cause of the drivability concern, and can dramatically shorten the number of diagnostic steps required to ascertain the cause of failure, something which isn't as simple to do with a carburetor. On the other hand, EFI systems require little regular maintenance; a carburetor typically requires seasonal and/or altitude adjustments.

Detailed function Note: These examples specifically apply to a modern EFI gasoline engine. Parallels to fuels other than gasoline can be made, but only conceptually.

Typical EFI components *Crank/Cam Position: Hall effect sensor *Airflow: Mass airflow sensor, sometimes this is inferred with a MAP sensor *Exhaust Gas Oxygen: Oxygen sensor, EGO sensor, UEGO sensor

Functional description Central to an EFI system is a computer called the Engine Control Unit (ECU), which monitors engine operating parameters via various sensors. The ECU interprets these parameters in order to calculate the appropriate amount of fuel to be injected, among other tasks, and controls engine operation by manipulating fuel and/or air flow as well as other variables. The optimum amount of injected fuel depends on conditions such as engine and ambient temperatures, engine speed and workload, and Automobile emissions control.

The electronic fuel injector is normally closed, and opens to inject pressurised fuel as long as electricity is applied to the injector's solenoid coil. The duration of this operation, called pulse width, is proportional to the amount of fuel desired. The electric pulse may be applied in closely-controlled sequence with the valve events on each individual cylinder (in a sequential fuel injection system), or in groups of less than the total number of injectors (in a batch fire system).

Since the nature of fuel injection dispenses fuel in discrete amounts, and since the nature of the 4-stroke-cycle engine has discrete induction (air-intake) events, the ECU calculates fuel in discrete amounts. In a sequential system, the injected fuel mass is tailored for each individual induction event. Every induction event, of every cylinder, of the entire engine, is a separate fuel mass calculation, and each injector receives a unique pulse width based on that cylinder's fuel requirements.

It is necessary to know the mass of air the engine "breathes" during each induction event. This is proportional to the intake manifold's air pressure/temperature, which is proportional to throttle position. The amount of air inducted in each intake event is known as "air-charge", and this can be determined using several methods. (See Mass airflow sensor, and MAP sensor.)

The three elemental ingredients for combustion are fuel, air and ignition system. However, complete combustion can only occur if the air and fuel is present in the exact stoichiometry, which allows all the carbon and hydrogen from the fuel to combine with all the oxygen in the air, with no undesirable polluting leftovers. Oxygen sensors monitor the amount of oxygen in the exhaust, and the ECU uses this information to adjust the air-to-fuel ratio in real-time.

To achieve stoichiometry, the air mass flow into the engine is measured and multiplied by the stoichiometric air/fuel ratio 14.64:1 (by weight) for gasoline. The required fuel mass that must be injected into the engine is then translated to the required pulse width for the fuel injector. The stoichiometric ratio changes as a function of the fuel; diesel, gasoline, ethanol, methanol, propane, methane (natural gas), or hydrogen.

Deviations from stoichiometry are required during non-standard operating conditions such as heavy load, or cold operation, in which case, the mixture ratio can range from 10:1 to 18:1 (for gasoline).

Pulse width is inversely related to pressure difference across the injector inlet and outlet. For example, if the fuel line pressure increases (injector inlet), or the manifold pressure decreases (injector outlet), a smaller pulse width will admit the same fuel. Fuel injectors are available in various sizes and spray characteristics as well. Compensation for these and many other factors are programmed into the ECU's software.

Sample pulsewidth calculations Note: These calculations are based on a 4-stroke-cycle, 5.0L, V-8, gasoline engine. The variables used are real data.

Calculate injector pulsewidth from airflow First the CPU determines the air mass flow rate from the sensors - lb-air/min. (The various methods to determine airflow are beyond the scope of this topic. See Mass airflow sensor, or MAP sensor.)

:*(lb-air/min) × (min/rev) × (rev/4-strokes-per-cycle) = (lb-air/intake-stroke) = (air-charge)

:::- min/rev is the reciprocal of engine speed (RPM) – minutes cancel. :::- rev/2-revs-per-cycle for an 8 cylinder 4-stroke-cycle engine.

:*(lb-air/intake-stroke) × (fuel/air) = (lb-fuel/intake-stroke)

:::- fuel/air is the desired mixture ratio, usually stoichiometric, but often different depending on operating conditions.

:*(lb-fuel/intake-stroke) × (1/injector-size) = (pulsewidth/intake-stroke)

:::- injector-size is the flow capacity of the injector, which in this example is 24-lbs/hour if the fuel pressure across the injector is 40 psi.

Combining the above three terms . . .

:*(lbs-air/min) × (min/rev) × (rev/4-strokes) × (fuel/air) × (1/injector-size) = (pulsewidth/intake-stroke)

Substituting real variables for the 5.0L engine at idle.

:*(0.55 lb-air/min) × (min/700 rev) × (rev/4-strokes-per-cycle) × (1/14.64) × (h/24-lb) × (3,600,000 ms/h) = (4.0 ms/intake-stroke)

Substituting real variables for the 5.0 L engine at maximum power.

:*(28 lb-air/min) × (min/5500 rev) × (rev/4-strokes-per-cycle) × (1/11.00) × (h/24-lb) × (3,600,000 ms/h) = (34.6 ms/intake-stroke)

Injector pulsewidth typically ranges from 4 ms/engine-cycle at idle, to 35 ms/engine-cycle at wide-open throttle. The pulsewidth accuracy is approximately 0.01 ms; injectors are very precise devices.

Calculate fuel-flow rate from pulsewidth :*(Fuel flow rate) ≈ (pulsewidth) × (engine speed) × (number of fuel injectors)

:::Looking at it another way:

:*(Fuel flow rate) ≈ (throttle position) × (rpm) × (cylinders)

:::Looking at it another way:

:*(Fuel flow rate) ≈ (air-charge) × (fuel/air) × (rpm) × (cylinders)

Substituting real variables for the 5.0 L engine at idle.

:*(Fuel flow rate) = (2.0 ms/intake-stroke) × (hour/3,600,000 ms) × (24 lb-fuel/hour) × (4-intake-stroke/rev) × (700 rev/min) × (60 min/h) = (2.24 lb/h)

Substituting real variables for the 5.0L engine at maximum power.

:*(Fuel flow rate) = (17.3 ms/intake-stroke) × (hour/3,600,000-ms) × (24 lb/h fuel) × (4-intake-stroke/rev) × (5500-rev/min) × (60-min/hour) = (152 lb/h)

The fuel consumption rate is 68 times greater at maximum engine output than at idle. This dynamic range of fuel flow is typical of a naturally aspirated passenger car engine. The dynamic range is greater on a supercharged or Turbocharger engine. It is interesting to note that 15 gallons of gasoline will be consumed in 37 minutes if maximum output is sustained. On the other hand, this engine could continuously idle for almost 42 hours on the same 15 gallons.

Various injection schemes === Throttle body injection ===Throttle-body injection (called TBI by General Motors Corporation and Central Fuel Injection (CFI) by Ford Motor Company) or monopoint injection was introduced in the mid-1980s as a transition technology toward individual port injection. The TBI system injects fuel at the throttle body (the same location where a carburetor introduced fuel). The induction mixture passes through the intake runners like a carburetor system. The justification for the TBI/CFI phase was low cost. Many of the carburetor's supporting components could be reused such as the air cleaner, intake manifold, and fuel line routing. This postponed the redesign and tooling costs of these components. Most of these components were later redesigned for the next phase of fuel injection's evolution, which is individual port injection, commonly known as EFI. TBI was used briefly on passenger cars and Jeeps during the mid-1980s, and by GM on heavy duty trucks all the way through On Board Diagnostics#OBD-I (ending in 1995).

Continuous injection Bosch's Jetronic#K Jetronic (K stands for kontinuierlich, or continuous) was introduced in 1974. In this system, fuel sprays constantly from the injectors, rather than being pulsed in time with the engine's intake strokes. Gasoline is pumped from the fuel tank to a large control valve called a fuel distributor, which separates the single fuel supply pipe from the tank into smaller pipes, one for each injector. The fuel distributor is mounted atop a control vane through which all intake air must pass, and the system works by varying fuel volume supplied to the injectors based on the angle of the air vane, which in turn is determined by the volume flowrate of air past the vane, and by the control pressure. The control pressure is regulated with a mechanical device called the control pressure regulator (CPR) or the warm-up regulator (WUR). Depending on the model, the CPR may be used to compensate for altitude, full load, and/or a cold engine. On cars equipped with an oxygen sensor, the fuel mixture is adjusted by a device called the frequency valve. The injectors are simple spring-loaded check valves with nozzles; once fuel system pressure becomes high enough to overcome the counterspring, the injectors begin spraying. K-Jetronic was used for many years between 1974 and the mid 1990s by Lamborghini, Ferrari, Mercedes-Benz, Volkswagen, Ford, Porsche, Audi, Saab, and Volvo. There was also a variant of the system called Jetronic#KE Jetronic with electronic instead of mechanical control of the control pressure.

Central port injection (CPI) General Motors Corporation developed an "in-between" technique called "central port injection" (CPI) or "central port fuel injection" (CPFI). It uses tubes with poppet valves from a central injector to spray fuel at each intake port rather than the central throttle-body. This system tends to have a high failure rate and repair is fairly easy. The 2 models used were CPFI from 1992 to 1995, and CSFI from 1996 and on. On early CPI (CPFI) systems fuel is continuously injected to all ports simultaneously also called "batch fire", which is less than optimal. On 1996 and later CSFI systems the fuel is sprayed sequentially as the name implies "Centralized Sequential Fuel Injection".

=== Multi-point fuel injection ===Multi-point fuel injection injects fuel into the intake port just upstream of the cylinder's intake valve, rather than at a central point within an intake manifold, referred to as SPFI, or single point fuel injection. MPFI systems can be sequential, in which injection is timed to coincide with each cylinder's intake stroke, batched, in which fuel is injected to the cylinders in groups, without precise synchronisation to any particular cylinder's intake stroke, or Simultaneous, in which fuel is injected at the same time to all the cylinders.

All modern EFI systems utilize sequential MPFI. Some Toyotas and other Japanese cars from the 1970s to the early 1990s used an application of Bosch's multipoint Jetronic#L Jetronic system manufactured under license by DENSO.

Direct injection Many diesel engines feature direct injection (DI). The injection nozzle is placed inside the combustion chamber and the piston incorporates a depression (often toroidal) where initial combustion takes place. Direct injection diesel engines are generally more efficient and cleaner than indirect injection engines. See also Common Rail (HDi) .

Some recent petrol engines utilize direct injection as well. Volkswagen and Audi (FSI) (for Fuel Stratified Injection), Mitsubishi(GDI), Mazda(DISI), Ford(DISI), BMW, Saab, Saturn Corporation, Lexus and General Motors. This is the next step in evolution from multi port fuel injection and offers another magnitude of emission control by eliminating the "wet" portion of the induction system.See also: Gasoline Direct Injection

Maintenance hazards Fuel injection introduces extra hazards in engine maintenance due to the high fuel pressures used. Residual pressure can remain in the fuel lines long after a car has last been used, which requires care to catch any spray when disconnecting a fuel hose. If a high-pressure diesel fuel injector is removed from its seat and operated in open air, there is a risk to the operator of Jet injector#Accidental jet injection.

External links Fuel injection is a means of metering fuel into an internal combustion engine. In modern automotive applications, fuel metering is one of several functions performed by an "engine management system".

A fuel injection system is designed and calibrated specifically for the type(s) of fuel it will handle: gasoline (petrol), Autogas (Liquefied petroleum gas, also known as propane), ethanol, methanol, methane (natural gas), hydrogen or diesel. The majority of fuel injection systems are for gasoline or diesel applications. With the advent of electronic fuel injection, the diesel and gasoline hardware has become quite similar. EFI's programmable firmware has permitted common hardware to be used with multiple different fuels.For gasoline engines, carburetors were the predominant method to meter fuel before the widespread use of fuel injection. However, a wide variety of injection systems have existed since the earliest usage of the internal combustion engine.

The primary functional difference between carburetors and fuel injection is that fuel injection atomizes the fuel by forcibly pumping it through a small nozzle under high pressure, while a carburetor relies on the vacuum created by intake air rushing through it to add the fuel to the airstream.

The fuel injector is only a nozzle and a valve: the power to inject the fuel comes from farther back in the fuel supply, from a pump or a pressure container.

Objectives The functional objectives for fuel injection systems can vary. All share the central task of supplying fuel to the combustion process, but it is a design decision how a particular system will be optimized. There are several competing objectives such as: *power output *fuel efficiency *emissions performance *ability to accommodate alternative fuels *durability *reliability *driveability and smooth operation *initial cost *maintenance cost *diagnostic capability *range of environmental operation

Certain combinations of these goals are conflicting, and it is impractical for a single engine control system to fully optimize all criteria simultaneously. In practice, automotive engineers strive to best satisfy a customer's needs competitively. The modern digital electronic fuel injection system is far more capable at optimizing these competing objectives than a carburetor.

Benefits Engine operation Operational benefits to the driver of a fuel-injected car include smoother and more dependable engine response during quick throttle transitions, easier and more dependable engine starting, better operation at extremely high or low ambient temperatures, reduced maintenance intervals, and increased fuel efficiency.

An engine's air/fuel ratio must be accuracy and precision controlled under all operating conditions to achieve the desired engine performance, emissions, driveability, and fuel economy. Modern electronic fuel injection systems meter fuel very accurately and precisely, and PID controller fuel control based on feedback from an oxygen sensor (or "O2 sensor") lets fuel-injected engines run considerably cleaner than comparable carbureted engines. Properly-designed fuel injection systems can react faster and more precisely to rapidly changing inputs such as rapid throttle movements, and can tailor fuel distribution to closely match the engine's needs across a wider range of operating conditions such as load, ambient temperature, operating temperature, fuel quality, and altitude (i.e., barometric pressure).

Emissions, efficiency, and power Fuel injection generally delivers a more accurate and equal mass of fuel to each cylinder of the engine than can a carburetor, thus improving the cylinder-to-cylinder distribution. Exhaust Automobile emissions control are cleaner, not only because the more precise and accurate fuel metering reduces the concentration of toxic chemicals leaving the engine, but also because exhaust cleanup devices such as the catalytic converter can be optimized to operate much more efficiently given exhaust of precise and predictable composition.

Fuel injection generally increases engine efficiency. With the improved cylinder-to-cylinder fuel distribution provided by fuel injection, less fuel is needed for the same power output. When cylinder-to-cylinder distribution is less than ideal, as is always the case to some degree, some cylinders receive excess fuel as a side effect of ensuring that all cylinders receive sufficient fuel. Power output is asymmetrical with respect to air/fuel ratio; burning extra fuel in the rich cylinders does not reduce power nearly as quickly as burning too little fuel in the lean cylinders. However, rich-running cylinders are undesirable from the standpoint of exhaust emissions, fuel efficiency, engine wear, and engine oil contamination. Deviations from perfect air/fuel distribution, however subtle, affect the emissions, by not letting the combustion events be at the chemically ideal (stoichiometric) air/fuel ratio. Grosser distribution problems eventually begin to reduce efficiency, and the grossest distribution issues finally affect power. Increasingly poorer air/fuel distribution affects emissions, efficiency, and power, in that order. By optimizing the homogeneity of cylinder-to-cylinder mixture distribution, all the cylinders approach their maximum power potential and the engine's overall power output improves.

A fuel-injected engine often produces more power than an equivalent carbureted engine. Fuel injection alone does not necessarily increase an engine's maximum potential output, for increased airflow is needed to burn more fuel to generate more heat to generate more output. The combustion process converts the fuel's chemical energy into heat energy, whether the fuel is supplied by fuel injectors or a carburetor. However, airflow is often improved with fuel injection, the components of which allow more design freedom to improve the air's path into the engine. In contrast, a carburetor's mounting options are limited because it is larger, it must be carefully oriented with respect to gravity, and it must be equidistant from each of the engine's cylinders to the maximum practicable degree. These design constraints generally compromise airflow into the engine. Furthermore, a carburetor relies on a drag-inducing Venturi effect to create a local air pressure difference, which forces the fuel into the air stream. The flow loss caused by the venturi, however, is small compared to other flow losses in the induction system. In a well-designed carburetor induction system, the venturi is not a significant airflow restriction.Aside from airflow considerations, fuel injection offers a more homogeneous air/fuel mixture due to better atomization of the fuel entering the cylinders.

History and development Frederick William Lanchester joined the Forward Gas Engine Company Birmingham, England in 1889. He carried out what were possibly the earliest experiments with fuel injection.

Fuel injection has been used commercially in diesel engines since the mid 1920s. The concept was adapted for use in petrol-powered aircraft during World War II, and direct injection was employed in some notable designs like the Daimler-Benz DB 603 and later versions of the Wright R-3350 used in the B-29 Superfortress.

One of the first commercial gasoline injection systems was a mechanical system developed by Robert Bosch GmbH and introduced in 1955 on the Mercedes-Benz 300SL. This system used a normal fuel pump, to provide fuel to a mechanically driven injection pump, which had separate plungers per injector to deliver a very high injection pressure. A variant of this system, also by Bosch, was later used by Porsche from 1969 until 1973 on the 911 production range. Porsche continued using it on its racing cars into the late seventies and early eighties, and cars like the Porsche 906, 908, 910, the famous 917 (in its regular normally aspirated or 5.5 Liter/1500 HP Turbocharged form), and 935 all used Bosch or Kugelfischer built variants of injection. It was also used by the BMW 2000 Ti. Due to the high pressure, the fuel atomisation was exceptional, resulting in good power, throttle response and the pump design offered second-to-none reliability. It did have drawbacks as the fuel economy and emission results were terribly inefficient compared to more modern injection setups such as electronic injection, or even the Jetronic systems that went in production in the early seventies.

In 1957, Chevrolet introduced a mechanical fuel injection option, made by General Motors Corporation' Rochester, New York Products division, for its GM Small-Block engine#283. This system directed the inducted engine air across a "spoon shaped" plunger, which moved in proportion to the air volume. The plunger connected to the fuel metering system which mechanically dispensed fuel to the cylinders via distribution tubes. This engine was rated at 283 hp (211 kW) from 283 in³ (4.6 L), though it really produced about 290 hp. This made it one of the first production engines in history to exceed 1 hp/in³ (45.5 kW/L), after Chrysler Chrysler Hemi engine engine and a number of others.

During the 1960s, other mechanical injection systems such as Hilborn were occasionally used on modified American V8 engines in various racing applications such as drag racing, oval racing, and road racing. These racing-derived systems were not suitable for everyday street use.

One of the first electronic fuel injection system was Electrojector, developed by the Bendix Corporation. In 1957, American Motors was to offer a special edition Rambler Rebel with a 288 horsepower AMC V8 engine#327 engine optionally equipped with Electrojector. This was to have been the first production EFI engine, but Electrojector's teething problems meant only a few cars were so equipped, and all are thought to have been retrofitted with 4-barrel carburetors before they were first sold. Chrysler offered Electrojector on the 1958 DeSoto Adventurer, arguably the first series-production car equipped with a throttle body EFI system, but the early electronic components weren't equal to the rigors of underhood service, and were too slow to keep up with the demands of "on the fly" engine control. Most vehicles originally so equipped were field-retrofitted with 4-barrel carburetors. The Electrojector patents were subsequently sold to Bosch.

Bosch developed an electronic fuel injection system, called Jetronic#D Jetronic (D for Druck, the German word for pressure), which was first used on the Volkswagen Type 3 in 1967. This was a speed/density system, using engine speed and intake manifold air density to calculate "air mass" flow rate and thus fuel requirements. The system used all analog, discrete electronics, and an electro-mechanical pressure sensor. The sensor was susceptible to vibration and dirt. This system was adopted by Volkswagen, Mercedes-Benz, Porsche, Citroën, Saab automobile and Volvo. Lucas licensed the system for production with Jaguar (car).

Bosch superseded the D-Jetronic system with the Jetronic#K Jetronic and Jetronic#L Jetronic systems for 1974, though some cars (such as the Volvo 164) continued using D-Jetronic for the following several years, and General Motors installed a very close copy of D-Jetronic on Cadillacs starting in 1977. L-Jetronic first appeared on the 1974 Porsche 914, and uses a mechanical airflow meter (L for Luft, German for air) which produces a signal that is proportional to "air volume". This approach required additional sensors to measure the barometer and temperature, to ultimately calculate "air mass". L-Jetronic was widely adopted on European cars of that period, and a few Japanese models a short time later.

In 1982, Robert Bosch GmbH introduced a sensor that directly measures the air mass flow into the engine, on their L-Jetronic system. Bosch called this Jetronic#LH Jetronic (L for Luftmasse, or air, and H for Hitzdraht, or hot-wire). The mass air sensor utilizes a heated platinum wire placed in the incoming air flow. The rate of the wire's cooling is proportional to the air mass flowing across the wire. Since the hot wire sensor directly measures air mass, the need for additional temperature and pressure sensors is eliminated. The LH-Jetronic system was also the first fully digital EFI system, which is now the standard approach. The advent of the digital microprocessor permitted the integration of all powertrain sub-systems into a single control module.

Supersession of carburetors Throughout the 1950s and 1960s, various federal, state and local governments conducted studies into the numerous sources of air pollution. These studies ultimately attributed a significant portion of air pollution to the automobile, and concluded air pollution is not bounded by local political boundaries. At that time, such minimal emission control regulations as existed were promulgated at the municipal or, occasionally, the state level. The ineffective local regulations were gradually supplanted by more comprehensive state and federal regulations. By 1967 the state of California (Governor Reagan), created the California Air Resources Board, and in 1970, the United States Environmental Protection Agency was formed. Both agencies now create and enforce emission regulations for automobiles, as well as for many other sources. Similar agencies and regulations were contemporaneously developed and implemented in Europe, Australia, and Japan.

The ultimate combustion goal is to match each molecule of fuel with a corresponding number of molecules of oxygen so that neither has any molecules remaining after combustion in the engine and catalytic converter. Such a balanced condition is known as stoichiometry. Extensive carburetor modifications and complexities were needed to approach stoichiometric engine operation in order to comply with increasingly-strict US automobile emissions control regulations of the 1970s and 1980s. This increase in complexity gradually eroded and then reversed the simplicity, cost, and packaging advantages carburetors had traditionally offered.

Fuel injection appeared first as novelty equipment on American-made cars in the late 1950s, such as the 1958 Chrysler products equipped with Bendix Corporation' ElectroJector, and 1957–1965 Rochester Products Division fuel injected Chevrolet Corvettes. About a decade later, more practical fuel injection systems were introduced in European-made cars. As Automobile emissions control progressively tightened worldwide, generally led by the US state of California's especially stringent rules, automakers had to improve the precision and accuracy with which fuel was metered to the engine. Catalytic converters also became practically universal equipment.

There are three primary types of toxic emissions from an internal combustion engine: Carbon Monoxide (CO), Unburned hydrocarbon (HC), and NOx (NOx). CO and HC result from incomplete combustion of fuel due to insufficient oxygen in the combustion chamber. NOx, in contrast, results from excessive oxygen in the combustion chamber. The opposite causes of these pollutants makes it difficult to control all three simultaneously. Once the permissible emission levels dropped below a certain point, catalytic treatment of these three main pollutants became necessary. This required a particularly large increase in fuel metering accuracy and precision, for simultaneous catalysis of all three pollutants requires that the fuel/air ratio be held within a very narrow range of stoichiometry. The open loop fuel injection systems had already improved cylinder-to-cylinder fuel distribution and engine operation over a wide temperature range, but did not offer sufficient fuel/air ratio control to enable effective exhaust catalysis. Closed loop fuel injection systems improved the air/fuel ratio control with an exhaust gas oxygen sensor. The O2 sensor is mounted in the exhaust system upstream of the catalytic converter, and enables the ECU to determine and adjust the air/fuel ratio precisely and quickly.

Fuel injection was phased in through the latter '70s and '80s at an accelerating rate, with the US and German markets leading and the UK and Commonwealth markets lagging somewhat, and since the early 1990s, almost all gasoline passenger cars sold in first world markets like the United States, Europe, Japan, and Australia have come equipped with electronic fuel injection (EFI). Many motorcycles still utilize carbureted engines, though all current high-performance designs have switched to EFI.

Fuel injection systems have evolved significantly since the mid 1980s. Current systems provide an accurate, reliable and cost-effective method of metering fuel and providing maximum engine efficiency with clean exhaust emissions, which is why EFI systems have replaced carburetors in the marketplace. EFI is becoming more reliable and less expensive through widespread usage. At the same time, carburetors are becoming less available, and more expensive. Even marine applications are adopting EFI as reliability improves. Virtually all internal combustion engines, including motorcycles, off-road vehicles, and outdoor power equipment, may eventually use some form of fuel injection.

It should be noted that carburetion remains a less costly alternative where strict emission regulations and advanced vehicle diagnostic and repair infrastructure do not exist, as in developing countries. Fuel injection is gradually replacing carburetors in these nations too as they adopt emission regulations conceptually similar to those in force in Europe, Japan, Australia and North America.

Basic function The process of determining the amount of fuel, and its delivery into the engine, are known as fuel metering. Early injection systems used mechanical methods to meter fuel (non electronic, or mechanical fuel injection). Modern systems are nearly all electronic, and use an electronic solenoid (the injector) to inject the fuel. An electronic engine control unit calculates the mass of fuel to inject.

Modern fuel injection schemes follow much the same setup. There is a mass airflow sensor or manifold absolute pressure sensor at the intake, typically mounted either in the air tube feeding from the air filter box to the throttle body, or mounted directly to the throttle body itself. The mass airflow sensor does exactly what its name implies; it senses the mass of the air that flows past it, giving the computer an accurate idea of how much air is entering the engine. The next component in line is the Throttle Body. The throttle body has a throttle position sensor mounted onto it, typically on the butterfly valve of the throttle body. The throttle position sensor (TPS) reports to the computer the position of the throttle butterfly valve, which the ECM uses to calculate the load upon the engine. The fuel system consists of a fuel pump (typically mounted in-tank), a fuel pressure regulator, fuel lines (composed of either high strength plastic, metal, or reinforced rubber), a fuel rail that the injectors connect to, and the fuel injector(s). There is a coolant temperature sensor that reports the engine temperature to the ECM, which the engine uses to calculate the proper fuel ratio required. In sequential fuel injection systems there is a camshaft position sensor, which the ECM uses to determine which fuel injector to fire. The last component is the oxygen sensor. After the vehicle has warmed up, it uses the signal from the oxygen sensor to perform fine tuning of the fuel trim.

The fuel injector acts as the fuel-dispensing nozzle. It injects liquid fuel directly into the engine's air stream. In almost all cases this requires an external pump. The pump and injector are only two of several components in a complete fuel injection system.

In contrast to an EFI system, a carburetor directs the induction air through a venturi pump, which generates a minute difference in air pressure. The minute air pressure differences both emulsify (premix fuel with air) the fuel, and then acts as the force to push the mixture from the carburetor nozzle into the induction air stream. As more air enters the engine, a greater pressure difference is generated, and more fuel is metered into the engine. A carburetor is a self-contained fuel metering system, and is cost competitive when compared to a complete EFI system.

An EFI system requires several peripheral components in addition to the injector(s), in order to duplicate all the functions of a carburetor. A point worth noting during times of fuel metering repair is that early EFI systems are prone to diagnostic ambiguity. A single carburetor replacement can accomplish what might require numerous repair attempts to identify which one of the several EFI system components is malfunctioning. Newer EFI systems since the advent of On-Board Diagnostics diagnostic systems, can be very easy to diagnose due to the increased ability to monitor the realtime data streams from the individual sensors. This gives the diagnosing technician realtime feedback as to the cause of the drivability concern, and can dramatically shorten the number of diagnostic steps required to ascertain the cause of failure, something which isn't as simple to do with a carburetor. On the other hand, EFI systems require little regular maintenance; a carburetor typically requires seasonal and/or altitude adjustments.

Detailed function Note: These examples specifically apply to a modern EFI gasoline engine. Parallels to fuels other than gasoline can be made, but only conceptually.

Typical EFI components *Crank/Cam Position: Hall effect sensor *Airflow: Mass airflow sensor, sometimes this is inferred with a MAP sensor *Exhaust Gas Oxygen: Oxygen sensor, EGO sensor, UEGO sensor

Functional description Central to an EFI system is a computer called the Engine Control Unit (ECU), which monitors engine operating parameters via various sensors. The ECU interprets these parameters in order to calculate the appropriate amount of fuel to be injected, among other tasks, and controls engine operation by manipulating fuel and/or air flow as well as other variables. The optimum amount of injected fuel depends on conditions such as engine and ambient temperatures, engine speed and workload, and Automobile emissions control.

The electronic fuel injector is normally closed, and opens to inject pressurised fuel as long as electricity is applied to the injector's solenoid coil. The duration of this operation, called pulse width, is proportional to the amount of fuel desired. The electric pulse may be applied in closely-controlled sequence with the valve events on each individual cylinder (in a sequential fuel injection system), or in groups of less than the total number of injectors (in a batch fire system).

Since the nature of fuel injection dispenses fuel in discrete amounts, and since the nature of the 4-stroke-cycle engine has discrete induction (air-intake) events, the ECU calculates fuel in discrete amounts. In a sequential system, the injected fuel mass is tailored for each individual induction event. Every induction event, of every cylinder, of the entire engine, is a separate fuel mass calculation, and each injector receives a unique pulse width based on that cylinder's fuel requirements.

It is necessary to know the mass of air the engine "breathes" during each induction event. This is proportional to the intake manifold's air pressure/temperature, which is proportional to throttle position. The amount of air inducted in each intake event is known as "air-charge", and this can be determined using several methods. (See Mass airflow sensor, and MAP sensor.)

The three elemental ingredients for combustion are fuel, air and ignition system. However, complete combustion can only occur if the air and fuel is present in the exact stoichiometry, which allows all the carbon and hydrogen from the fuel to combine with all the oxygen in the air, with no undesirable polluting leftovers. Oxygen sensors monitor the amount of oxygen in the exhaust, and the ECU uses this information to adjust the air-to-fuel ratio in real-time.

To achieve stoichiometry, the air mass flow into the engine is measured and multiplied by the stoichiometric air/fuel ratio 14.64:1 (by weight) for gasoline. The required fuel mass that must be injected into the engine is then translated to the required pulse width for the fuel injector. The stoichiometric ratio changes as a function of the fuel; diesel, gasoline, ethanol, methanol, propane, methane (natural gas), or hydrogen.

Deviations from stoichiometry are required during non-standard operating conditions such as heavy load, or cold operation, in which case, the mixture ratio can range from 10:1 to 18:1 (for gasoline).

Pulse width is inversely related to pressure difference across the injector inlet and outlet. For example, if the fuel line pressure increases (injector inlet), or the manifold pressure decreases (injector outlet), a smaller pulse width will admit the same fuel. Fuel injectors are available in various sizes and spray characteristics as well. Compensation for these and many other factors are programmed into the ECU's software.

Sample pulsewidth calculations Note: These calculations are based on a 4-stroke-cycle, 5.0L, V-8, gasoline engine. The variables used are real data.

Calculate injector pulsewidth from airflow First the CPU determines the air mass flow rate from the sensors - lb-air/min. (The various methods to determine airflow are beyond the scope of this topic. See Mass airflow sensor, or MAP sensor.)

:*(lb-air/min) × (min/rev) × (rev/4-strokes-per-cycle) = (lb-air/intake-stroke) = (air-charge)

:::- min/rev is the reciprocal of engine speed (RPM) – minutes cancel. :::- rev/2-revs-per-cycle for an 8 cylinder 4-stroke-cycle engine.

:*(lb-air/intake-stroke) × (fuel/air) = (lb-fuel/intake-stroke)

:::- fuel/air is the desired mixture ratio, usually stoichiometric, but often different depending on operating conditions.

:*(lb-fuel/intake-stroke) × (1/injector-size) = (pulsewidth/intake-stroke)

:::- injector-size is the flow capacity of the injector, which in this example is 24-lbs/hour if the fuel pressure across the injector is 40 psi.

Combining the above three terms . . .

:*(lbs-air/min) × (min/rev) × (rev/4-strokes) × (fuel/air) × (1/injector-size) = (pulsewidth/intake-stroke)

Substituting real variables for the 5.0L engine at idle.

:*(0.55 lb-air/min) × (min/700 rev) × (rev/4-strokes-per-cycle) × (1/14.64) × (h/24-lb) × (3,600,000 ms/h) = (4.0 ms/intake-stroke)

Substituting real variables for the 5.0 L engine at maximum power.

:*(28 lb-air/min) × (min/5500 rev) × (rev/4-strokes-per-cycle) × (1/11.00) × (h/24-lb) × (3,600,000 ms/h) = (34.6 ms/intake-stroke)

Injector pulsewidth typically ranges from 4 ms/engine-cycle at idle, to 35 ms/engine-cycle at wide-open throttle. The pulsewidth accuracy is approximately 0.01 ms; injectors are very precise devices.

Calculate fuel-flow rate from pulsewidth :*(Fuel flow rate) ≈ (pulsewidth) × (engine speed) × (number of fuel injectors)

:::Looking at it another way:

:*(Fuel flow rate) ≈ (throttle position) × (rpm) × (cylinders)

:::Looking at it another way:

:*(Fuel flow rate) ≈ (air-charge) × (fuel/air) × (rpm) × (cylinders)

Substituting real variables for the 5.0 L engine at idle.

:*(Fuel flow rate) = (2.0 ms/intake-stroke) × (hour/3,600,000 ms) × (24 lb-fuel/hour) × (4-intake-stroke/rev) × (700 rev/min) × (60 min/h) = (2.24 lb/h)

Substituting real variables for the 5.0L engine at maximum power.

:*(Fuel flow rate) = (17.3 ms/intake-stroke) × (hour/3,600,000-ms) × (24 lb/h fuel) × (4-intake-stroke/rev) × (5500-rev/min) × (60-min/hour) = (152 lb/h)

The fuel consumption rate is 68 times greater at maximum engine output than at idle. This dynamic range of fuel flow is typical of a naturally aspirated passenger car engine. The dynamic range is greater on a supercharged or Turbocharger engine. It is interesting to note that 15 gallons of gasoline will be consumed in 37 minutes if maximum output is sustained. On the other hand, this engine could continuously idle for almost 42 hours on the same 15 gallons.

Various injection schemes === Throttle body injection ===Throttle-body injection (called TBI by General Motors Corporation and Central Fuel Injection (CFI) by Ford Motor Company) or monopoint injection was introduced in the mid-1980s as a transition technology toward individual port injection. The TBI system injects fuel at the throttle body (the same location where a carburetor introduced fuel). The induction mixture passes through the intake runners like a carburetor system. The justification for the TBI/CFI phase was low cost. Many of the carburetor's supporting components could be reused such as the air cleaner, intake manifold, and fuel line routing. This postponed the redesign and tooling costs of these components. Most of these components were later redesigned for the next phase of fuel injection's evolution, which is individual port injection, commonly known as EFI. TBI was used briefly on passenger cars and Jeeps during the mid-1980s, and by GM on heavy duty trucks all the way through On Board Diagnostics#OBD-I (ending in 1995).

Continuous injection Bosch's Jetronic#K Jetronic (K stands for kontinuierlich, or continuous) was introduced in 1974. In this system, fuel sprays constantly from the injectors, rather than being pulsed in time with the engine's intake strokes. Gasoline is pumped from the fuel tank to a large control valve called a fuel distributor, which separates the single fuel supply pipe from the tank into smaller pipes, one for each injector. The fuel distributor is mounted atop a control vane through which all intake air must pass, and the system works by varying fuel volume supplied to the injectors based on the angle of the air vane, which in turn is determined by the volume flowrate of air past the vane, and by the control pressure. The control pressure is regulated with a mechanical device called the control pressure regulator (CPR) or the warm-up regulator (WUR). Depending on the model, the CPR may be used to compensate for altitude, full load, and/or a cold engine. On cars equipped with an oxygen sensor, the fuel mixture is adjusted by a device called the frequency valve. The injectors are simple spring-loaded check valves with nozzles; once fuel system pressure becomes high enough to overcome the counterspring, the injectors begin spraying. K-Jetronic was used for many years between 1974 and the mid 1990s by Lamborghini, Ferrari, Mercedes-Benz, Volkswagen, Ford, Porsche, Audi, Saab, and Volvo. There was also a variant of the system called Jetronic#KE Jetronic with electronic instead of mechanical control of the control pressure.

Central port injection (CPI) General Motors Corporation developed an "in-between" technique called "central port injection" (CPI) or "central port fuel injection" (CPFI). It uses tubes with poppet valves from a central injector to spray fuel at each intake port rather than the central throttle-body. This system tends to have a high failure rate and repair is fairly easy. The 2 models used were CPFI from 1992 to 1995, and CSFI from 1996 and on. On early CPI (CPFI) systems fuel is continuously injected to all ports simultaneously also called "batch fire", which is less than optimal. On 1996 and later CSFI systems the fuel is sprayed sequentially as the name implies "Centralized Sequential Fuel Injection".

=== Multi-point fuel injection ===Multi-point fuel injection injects fuel into the intake port just upstream of the cylinder's intake valve, rather than at a central point within an intake manifold, referred to as SPFI, or single point fuel injection. MPFI systems can be sequential, in which injection is timed to coincide with each cylinder's intake stroke, batched, in which fuel is injected to the cylinders in groups, without precise synchronisation to any particular cylinder's intake stroke, or Simultaneous, in which fuel is injected at the same time to all the cylinders.

All modern EFI systems utilize sequential MPFI. Some Toyotas and other Japanese cars from the 1970s to the early 1990s used an application of Bosch's multipoint Jetronic#L Jetronic system manufactured under license by DENSO.

Direct injection Many diesel engines feature direct injection (DI). The injection nozzle is placed inside the combustion chamber and the piston incorporates a depression (often toroidal) where initial combustion takes place. Direct injection diesel engines are generally more efficient and cleaner than indirect injection engines. See also Common Rail (HDi) .

Some recent petrol engines utilize direct injection as well. Volkswagen and Audi (FSI) (for Fuel Stratified Injection), Mitsubishi(GDI), Mazda(DISI), Ford(DISI), BMW, Saab, Saturn Corporation, Lexus and General Motors. This is the next step in evolution from multi port fuel injection and offers another magnitude of emission control by eliminating the "wet" portion of the induction system.See also: Gasoline Direct Injection

Maintenance hazards Fuel injection introduces extra hazards in engine maintenance due to the high fuel pressures used. Residual pressure can remain in the fuel lines long after a car has last been used, which requires care to catch any spray when disconnecting a fuel hose. If a high-pressure diesel fuel injector is removed from its seat and operated in open air, there is a risk to the operator of Jet injector#Accidental jet injection.

External links

Fuel Injection Systems
This course is for technicians that have a basic understanding of how fuel injection systems work, but lack confidence with newer electronic systems.

Fuel Injection Pumps
we have a wide range of in-tank fuel injection pump applications. please contact us to discuss your requirements

Fuel Injection Services - Tom Day Ltd - fuel injection repairs and ...
Repairs and servicing for both petrol and diesel engine fuel injection systems in all types of vehicles.

Diesel Bob Tuning - Diesel Fuel Injection
For the owner, driver of any diesel powered vehicle who wants the best from their vehicle. Offering the ultimate diesel engine tuning as well as a diesel fuel injection service ...

MSD Fuel Injection - Performance EFI Systems
MSD Fuel Injection offers race proven performance EFI systems ... MSD Fuel Injection offers race proven performance EFI systems. What does an ignition company know about fuel ...

RPi Engineering - V8 Engine - Carburetion and Fuel Injection
The Rover V8 information Centre and web site, Its all in here, more free info on the facts, failings and fabulouse possibilities of this remarkable engine

Fuel injection - Wikipedia, the free encyclopedia
Fuel injection is a system for mixing fuel with air in an internal combustion engine. It has become the primary system used in automotive engines, having almost completely replaced ...

Brian Jones Auto Services Fuel Injection Mail Order Service - Daily ...
Brian Jones Auto Services Fuel Injection cleaning by post ... WARRANTY APPROVED QUALITY Queensway, Wrexham, North Wales LL13 8UN Telephone : 01978 352077

Welcome to Fuel Injection Specialties
Offer aftermarket performance injectors, over-size injectors and custom sizing for all applications.

Bosch Fuel Injection Systems - Bosch K-Jetronic
Bosch Fuel Injection Systems - Bosch K-Jetronic. ... FOR ALL MODELS OF VOLVO CAR • FOR ALL AGES OF VOLVO CAR

 

Fuel Injection



 
Copyright © 2008 Hintcenter.com - All rights reserved.
Home | Terms of Use | Privacy Policy
All Trademarks belong to their repective owners. Many aspects of this page are used under
commercial commons license from Yahoo!